V-Nose Deck

With our V-nose option, the front deck of the trailer is extended forward to make a “V” over the tongue. The rub rail is wrapped around the frame, allowing you drive off the front of the trailer. This option works great for snow mobile trailers and ATVs. Our V-nose deck option is available on our L5 & L6 deckover trailers.

V nose trailer

Half Inch Square Traction Bars

Our half inch square traction bars significantly increase your traction when loading equipment on a hydraulic dovetail or tilt trailer.
The half inch bars are welded to the rear of the trailer tail.
They also make loading in wet and icy conditions safer.

Option Code: -TRA1

Available on FY, LY, SY, T6, T7, T8, T9, TD, & TF models.

Square traction bars
Square traction bars

Weld-on Strap Ratchets

  • Working load limit: 5,500 lbs/2500 kgs
  • Winch ratchets use 4″ straps (not included)
  • Winch ratchets are weld to the outside frame (2″ x 6″ tube)
  • Dealer Option Code: (F)
  • This option is often combined with the Under Frame Tie Down Flat
  • We also offer Slide Track Ratchets
Weld on strap ratchets
Weld on strap ratchets
Weld on strap ratchets

9990 GVWR

This option sets the Gross Vehicle Weight Rating (GVWR) to 9,990 lbs (4,531 Kg)

9900 pound weight limit label

12″ on Center Cross-members

Our standard dump trailer cross-members are on 16″ centers.

The upgrade to 12″ on center cross-members reduces the span between cross-members on the bed of your dump trailer.

This option is most popular for users that are loading heavy equipment or large rocks.

12 inch cross members
Dump trailer cross members
12 inch cross members PJ Trailers

Led lights

Upgrade your utility trailer lights with our LED light package option.
LED lights are brighter, faster, draw less current, and last longer than incandescent lights.
The lights are so reliable they feature a lifetime warranty.

LED trailer lights

Power Up & Down with Gravity Down

The standard hydraulic unit on a PJ dump or tilt trailer has a power up and down hydraulics. With a power up/power down plus gravity down unit, you reduce the current draw by using gravity when lowering your tilt or dump trailer.

This innovation reduces battery consumption and increases your raise and lower cycles per day. This pump is not compatible with our wireless remote kit.

Availabe D2, D7, D8, D9, DD, DJ, DL, DN, DS, T6, T8 and TF
Option Code: E (on dumps only)

Gravity Down system

Grain Chute

  • Availabe D7, D9, DD, DJ, DL, DN, & DS models
  • Option Code: Z
  • Part Numbers: 160178
Trailer grain chute
PJ Trailers grain chute

Dump Tarp Kit

Most states require dump tarps by law to keep your cargo/aggregate in your trailer. We offer a pull bar mesh tarp kit that is installed in the front of the dump on our tarp mount brackets. These pull bar tarp kits can come installed from the factory or be bolted on a later date.

Option Code: P
Photo of 83″ Wide Dump Tarp Kit

Dump tarp kit from PJ Trailers

Tarp Brackets

Almost all states have tarping laws that apply to dump trailers requiring you to keep your aggregate from escaping the dump trailer bed. Even if your area does not require a tarp, we encourage using a tarp as they reduce material and cargo loss. Our tarp brackets making adding a roll-up tarp to your dump trailer painless.

  • Compatible with PJ Tarp Kits
  • Option Code: B
Tarp brackets for trailers
PJ trailers tarp brackets

Pair of D-rings

  • D-rings rated at 11,780 lbs
  • Option Code: D
PJ Trailers D Rings
D ring for trailers

11 Gauge Steel Floor with D-rings

Steel floors on trailers are most popular for their long term durability. Other advantages are easy clean-up and you can weld directly to the floor.

Note: We recommend upgrading to 16″ on centers in conjunction with the steel floor for our light car haulers (C4 and C5) and utility trailers.

11 gauge steel floor from PJ Trailers
PJ Trailers 11 gauge steel floor
11 gauge steel floor

Dump Side Extensions

Need taller sides on your dump trailer? We offer steel side extensions on our 83″ wide models. Steel side extensions are smoother than wooden side extensions are easy to install & remove. These sides slide into the stake pockets and tubing on the rear doors. We also offer Heavy Duty Side Extensions and Expanded Metal Side Extensions.

  • Models Available: D7, D9, DJ, & DL
  • Option Code: Y
PJ trailer dump side extensions

Expanded Metal Side Extensions

Need taller sides on your dump trailer? We offer Expanded Metal Side Extensions on our 83″ wide models. These sides slide into the stake pockets and tubing on the rear doors. Compared to solid side extensions they have less wind drag and are lighter.

  • Models Available: D7, D9, DJ, & DL
  • Option Code: V
expanded metal side extensions for trailers
expanded metal side extensions

HD 24 Inch Dump Side Extensions

Need taller sides on your dump trailer? We offer HD 24″ Dump Side Extensions on our 83″ wide models. These sides slide into the stake pocket, bolt to the dump bed, and in the front corners. These HD sides are made from heavy 10 gauge material, making them the toughest side extensions on the market.

  • Models Available: D7, D9, DJ, & DL
  • Option Code: H
24 inch dump side extensions

Regular Sides with Solid Metal

Our utility trailers sides can be ordered with a solid metal backing. The backing is made from 16 gauge smooth plate steel and fill the inside of the standard 9″ high removable sides. These sides are not to be confused with our 22″ Solid Metal Sides w/ 2″ Pipe-top Rail

  • Models Available: U6, U7, & U8
  • Option Code: 5
Solid side utility trailer
Solid side utility trailer wheel cover

22 lb I-beam Frame, Riser, & Neck

We recommend upgrading to 22 lbs I-beam on dual wheel goosenecks that have a 30,000 lbs GVWR. This would include triple axle gooseneck with three 10k or 12k axles. This would also include tandem dual gooseneck with two 15k or 16k axles.

22 lb I-beam Specifications

  • Weight per ft: 22 lbs
  • Height: 12.31″
  • Flange Width: 4.030″
  • Web Thickness: .260″
22 pound beam frame

19 lb I-beam Frame, Riser, & Neck

Our single wheel goosenecks come with 12″ x 14 lb I-beam standard for the frame, risers, and neck. We recommend upgrading to 19 lbs I-beam on single wheel goosenecks that are 30 ft or more.

19 lb I-beam Specifications

  • Weight per ft: 19 lbs
  • Height: 12.16″
  • Flange Width: 4.005″
  • Web Thickness: .235″
19 pound beam frame

6″ Taller Gooseneck Riser

Do you have lifted truck or big cab & chassis with a tall bed height? If so, you might want to consider ordering your gooseneck with a 6″ taller riser. Our 6″ taller riser will keep your gooseneck trailer riding level. If you aren’t sure about this option we recommend taking your truck to your local PJ Trailers Dealer and hooking up to a standard gooseneck to see if the taller risers are needed.

6 inch neck riser for PJ trailers

Dump Spare Tire & Mount

The dump spare tire and mount option is a full size spare that is installed in front of the fender on the passenger side just below the dump side support. The spare tire and mount can also be mounted on the driver side if requested.

Note: On gooseneck dump trailers the spare tire is mounted inside of the neck of the trailer.

Trailer Models: D7, D9, DL and DJ

Dump spare time and mount
Spare tire and mount
Black dump spare tire mount
Dump spare tire mount

Under Frame Bridging

Under frame bridging is standard on goosenecks 30 feet and up. It can be added to goosenecks are under 30 feet as an option. Under frame bridging is a 2″ x 3/8″ flat that spans the bottom of the trailer frame to minimize frame sag under heavy loads.

PJ Trailer underframe bridging
Underframe Bridging

Rear Support Jacks

Rear support jacks stabilize the tail of the trailer during loading. When you order your trailer with rear support jacks we install two 5,000 lbs Bulldog pipe mount top-wind jacks.

PJ Trailer rear support jacks
Rear support jacks for trailers

Torque Tube

A torque tube absorb the twisting forces that are applied to the trailer frame during loading and hauling. Adding a torque tube to your trailer creates a more stable platform with less flex and sway when hauling

Trailer torque tube
Torque Tube
Torque tube model

Landscape Trailer Sides

We offer both 2 ft & 4ft expanded metal sides on our channel frame utility trailers (U6, U7, & U8). These sides are most popular for landscaping, hauling brush, and ATV/UTV use.

  • Fits U6, U7, & U8 Channel Utility Trailers
  • Sides bolt-on through stake pockets
  • 2ft Sides Option Code: 2
  • 4ft Sides Option Code: 4
  • Other popular options to order with landscape sides include a side gate and landscape cage.
Large Landscape trailer

Deck on the Neck

Our deck on the neck option turns an area that is typically wasted into highly usable deck space. This option is quite popular for hauling attachments, tools, bales, and palleted cargo. It is also used on some hot-shot trailers since it allows the driver to carry additional cargo.

  • Mitered corners for cab clearance
  • Outside frame made from 6″ x 2″ tubing
  • 3″ Channel Crossmembers on 16″ centers
  • 102″ wide (rail to rail) x 89″ long
  • Approximate weight: 450 lbs/204 kg
  • Includes clearance lighting
  • Includes Stake Pockets, Rubrail, & Pipe Spools
  • D-rings & slide track w/ ratchets can be added
Large Landscape trailer

Solid Sides with Pipe-top Rail

We offer 22″ Solid Metal Sides with a 2″ Pipetop Rail on our channel frame utility trailers (U6, U7, & U8). This option is quite popular with contractors, landscapers, and rental customers. Also, some prefer solid metal sides over expanded metal, since signs & graphics can be applied directly to the trailer’s side.

  • Fits U6, U7, & U8 Channel Utilities
  • Total side height is 22″
  • Top rail is made from 2″ pipe
  • Sides bolt-on through stake pockets
  • Dealer Option Code: Z
PJ Trailers solid side utility trailer
Solid Metal Sides for trailer wheels

Under Frame Tie Down Flat

  • Tie down flat is used for strapping down cargo and equipment
  • Flat is mounted below the deck of the trailer, welded to each cross-member
  • Made from 2″ x 3/8″ steel flat
  • Gives you unlimited tie-down points the entire length of the deck
  • 2004 DOT law made it illegal to use rub rail for load securement
  • Flat runs from the front of the deck to the dovetail
  • Often ordered in combination with our 4″ winch ratchets on a slide-track
  • Dealer Option Code: (9) flat on one side or (99) flat on both sides
  • Available on FS, LD, FD, FY AND, LY models
Under frame tie down

Pallet Fork Holder

Want mud flaps on your single wheel gooseneck? We offer single wheel mudflaps on the following models:

FS, T8, & T9

Option Code: -MD01

PJ Trailers mud flaps

Trailer Options

When you depend on trailers for your day-to-day work, you need a custom solution that helps you get things done more efficiently and effectively. At Nationwide Trailers, we offer a range of trailer options so you can create a custom solution that brings value to your work.

Since 2009, the team at Nationwide Trailers has provided a huge selection and outstanding customer service to equipment and logistics companies, independent and general contractors, farmers and ranchers, landscape companies and others. You can find the right solutions in our inventory because we offer so many trailer options.

Explore our vast selection, and contact us with any questions or if you need additional support as you browse.

Discover Your Many Trailer Options

What types of trailers will you find at Nationwide Trailers? Here’s a look at just some of the different ways you can customize your ultimate selection:

  • Type: Choose from a wide range of trailer types, including enclosed trailers, flatbed trailers, hotshot trailers, dump trailers, car trailers, utility trailers, equipment trailers, tilt trailers, shipping container trailers, landscape trailers, horse/stock trailers, fuel/welding trailers, oilfield trailers and more.
  • Color: In addition to offering traditional black powder coat, we also carry equipment yellow powder coat, white powder coat, grey powder coat, red powder coat, desert tan powder coat, tractor green powder coat and tractor orange powder coat.
  • Flooring: Select from among several flooring options, including Blackwood rubber infused, diamond plate steel, smooth steel, and rough oak.
  • Accessories: You’ll find no shortage of accessories when considering various trailer options, including solar battery chargers, cargo tie-down loops, bolt-on chain racks, wireless remotes, bolt-on light bars, stake pocket spare tire mounts, weld-on stake pocket D-rings, cold weather wiring harnesses, stainless steel wheel simulators and more.

What you see listed above is just a sampling of the many trailer options you’ll find at Nationwide Trailers. Take a look at our full inventory to explore even more trailer options.

Get the Trailer You Need at Nationwide Trailers

We’re committed to two things at Nationwide Trailers. First, we always offer a huge selection of trailers. This massive inventory is designed and curated, so a customer from any background can explore our trailers and find an ideal solution. And, second, we always offer outstanding expert consultation and friendly customer service. We’re willing to go the extra mile to meet your needs, whether that means meeting with out-of-state customers, staying late to hook up a trailer or coming in on the weekend to help someone. Some of our sales reps have even delivered trailers after hours or on the weekend.
We serve our customers from locations in Houston, Pasadena, Odessa, Fort Worth, San Antonio, Tulsa and Little Rock. When you come to us with a unique problem, we can provide the trailer to solve it. Explore your many trailer options at Nationwide Trailers, and discover a huge selection and customer service you can count on.
Browse our selection of trailer options, and contact us with questions or if you need expert guidance.