Shop Trailers by Model

• 14 ft
• Bumper Pull
• 14,000 lb GVWR

• Contractors
• Mixed material

The value pick for standard contractor use and mixed material.

• 14 ft–16 ft
• Gooseneck
• 15,680 lb GVWR

• Commercial hauling
• High volume

Gooseneck stability + telescopic lift — 14ft or 16ft, 24in to 48in sides.

• 14 ft
• Bumper Pull
• 15,400 lb GVWR

• Dense loads
• Frequent use

Telescopic lift built for frequent, heavier loads.

• 14 ft–16 ft
• Bumper Pull
• 14,000 lb GVWR

• Contractor cleanup
• Material hauling
• Equipment loading

A 14K bumper-pull dump lineup for contractor cleanup, material hauling, and equipment loading.

• 20 ft–40 ft
• Gooseneck

• Hot-shot freight
• Non-CDL
• Equipment

Single-wheel gooseneck deckover on a 12″ I-beam, 15,680 GVWR. Non-CDL friendly and the go-to for hot-shot freight, tractors, and hay. 8k axle upgrade available.

• 32 ft–40 ft
• Gooseneck
• 25,000 lb–25,900 lb GVWR

• Heavy equipment
• Hot-shot
• Long haul

Low-pro dual-wheel deck on 10k axles, up to 25,900 GVWR. The hot-shot favorite for heavy equipment and long hauls where you need the extra rating.

• 40 ft
• Gooseneck
• 25,900 lb GVWR

• Low equipment
• Heavy iron
• Commercial hauling

Heavy gooseneck flatdeck with a powered hydraulic dovetail on 12k axles. Loads low equipment at a flat angle, then folds up for full deck length hauling.

• 30 ft–32 ft
• Gooseneck
• 15,680 lb GVWR

• Hot-shot freight
• Lower deck
• Non-CDL

Low-profile pierced-beam single-wheel deck, 15,680 GVWR. Lower load angle and a lighter tare than the Quest — the medium-duty hot-shot pick.

• 14 ft
• Bumper Pull
• 2,995 lb GVWR

• General hauls
• Mowers
• Materials

Widest single-axle at 83″ with a longer deck. The most trailer you can pull single-axle before stepping up to a tandem.

• 14 ft–20 ft
• Bumper Pull
• 7,000 lb–9,899 lb GVWR

• Heavier loads
• Small equipment
• Contractors

83″ tandem-axle utility in lengths to 20ft, with 3,500 or 5,200lb axle options. The heavy-duty everyday hauler for mixed loads and small equipment.

• 12 ft
• Bumper Pull
• 7,000 lb GVWR

• Mixed loads
• Materials

Overwidth 83″ x 12ft pipe-top on tandem axles, 7,000lb GVWR. Wide stance and real payload in the shortest tandem length.

• 14 ft
• Bumper Pull
• 2,995 lb–7,000 lb GVWR

• Mowers
• Materials
• General hauls

14ft of 77″-wide deck on a single axle, 2,995lb GVWR. The longest single-axle pipe-top in the line: big deck, light tow.

• 20 ft–24 ft
• Bumper Pull / Gooseneck
• 14,000 lb–15,680 lb GVWR

• Skid steers
• Equipment
• Contractors

14K 6″ channel equipment tilt on 7k axles, 83″ deck. The volume tilt for skid steers and mid-size machines that roll on low.

• 20 ft–24 ft
• Bumper Pull
• 14,000 lb GVWR

• Equipment
• Vehicles
• Contractors

14K gravity up/down tilt on a 6″ channel frame, 83″ deck, torsion axles. Straightforward loading for equipment and vehicles without a powered bed.

• 22 ft–26 ft
• Bumper Pull / Gooseneck
• 14,000 lb–15,680 lb GVWR

• Deckover loading
• Equipment
• Vehicles

Deckover tilt on 7k–8k axles, 96″ deck. Full-width low-angle loading for equipment and vehicles that need the extra deck.

• 20 ft
• Bumper Pull
• 14,000 lb GVWR

• Heavy equipment
• Daily use

8″ I-beam equipment tilt built for heavier machines than a channel tilt. Stiffer frame for daily jobsite loading of loaded iron.

• 20 ft
• Bumper Pull

• Skid steers
• Contractors
• Value pick

14K everyday hauler on a 6″ channel frame with 5ft stand-up ramps and a 2ft dovetail. The value 14K for skid steers and compact tractors.

• 20 ft
• Bumper Pull
• 14,000 lb GVWR

• Equipment
• Vehicles
• Contractors

83″ x 20ft equipment hauler on tandem 7k axles, 14,000lb GVWR. A straightforward 14K bumper pull for machines and vehicles.

• 20 ft–24 ft
• Bumper Pull

• Heavy machines
• Daily use
• Contractors

Heaviest-built 14K in the line: 8″ channel frame, 4ft dovetail, and Bigfoot spring-assist ramps. Oversized tongue toolbox. Built for loaded machines and daily use.

• 16 ft–20 ft
• Bumper Pull
• 14,000 lb GVWR

• Secured loads
• Loose material
• Equipment

14K angle pipe-top on 7k axles. Pipe rails let you rack and tie down loose material or short equipment on a shorter 83″ deck.

• Gooseneck

• Shipping containers
• Roll-off loads
• Commercial hauling

25K gooseneck with a full hydraulic tilt bed, removable side guiderails, and a winch plate. Tilts to load and set down containers, then hauls them over the road.

• 16 ft
• Bumper Pull
• 4,500 lb GVWR

• Debris runs
• Job-site cleanup

16ft x 77″ trash trailer with tall containment sides, 4,500lb GVWR. Built for debris runs and job-site cleanup.

• 16 ft–20 ft
• Bumper Pull / Gooseneck
• 14,000 lb GVWR

• Specialty hauls

Purpose-built monorail hauler in 16 and 20ft lengths, 14,000lb GVWR, bumper pull or gooseneck.

• 32 ft–40 ft
• Bumper Pull / Gooseneck
• 15,680 lb GVWR

• Pipe & tubing
• Oilfield supply

96″-wide pipe hauler in 32 and 40ft lengths, 15,680lb GVWR, bumper pull or gooseneck. Built for long joints of pipe and tubing.

• 18 ft–20 ft
• Bumper Pull
• 7,000 lb GVWR

• Cars
• Project vehicles
• Value pick

5″ channel car hauler on 3,500lb axles, 83″ deck. Low load angle and slide-in ramps for cars and light project vehicles behind a half-ton.

• 24 ft
• Bumper Pull
• 14,000 lb GVWR

• Mid-size machines
• Vehicles
• Contractors

The workhorse: 102″ super-wide deck, 6″ channel, 7k axles, and 4,000lb drive-over fenders. Handles mid-size machines, cars, and UTVs all day.

• 20 ft
• Bumper Pull
• 9,899 lb GVWR

• Compact tractors
• Value pick

Light 5″ channel deck on 5,200lb axles. The value pick for compact tractors, buggies, and smaller skid steers behind a half-ton or 3/4-ton.

• 20 ft
• Bumper Pull
• 9,899 lb GVWR

• Light equipment
• Value pick

Low-deck 5″ channel equipment trailer, 83″ wide. Value build for lighter machines and mixed loads when you don't need a full-width deck.

• 16 ft–24 ft
• Bumper Pull
• 14,000 lb GVWR

• Tools & gear
• Secure storage
• Contractors

14K all-steel enclosed box in 6.5, 7.10, or 8.5ft widths and 14–24ft lengths. Formed steel walls and roof, plywood floor. Barn doors standard, ramp door available.

• 14 ft–24 ft
• Bumper Pull

• Contractors
• Rot-free build
• Secure storage

Wood-free composite-panel enclosed cargo from 7x14 to 8.5x24, 7,000 to 14,000lb GVWR. Panel construction that won't rot.

• 8 ft–12 ft
• Bumper Pull

• Tools & gear
• Secure storage

Single-axle enclosed cargo from 5x8 to 6x12, 2,990 or 3,500lb GVWR. A lockable, weather-tight box any truck or SUV can pull.

• 12 ft–28 ft
• Bumper Pull

• Contractors
• Toys & gear
• Secure storage

Tandem-axle enclosed cargo from 6x12 to 8.5x28, 7,000 to 14,000lb GVWR. The full spread of contractor and toy-hauler sizes.

• 12 ft
• Bumper Pull

• Lawn crews
• Mulch & debris

12ft landscape in 77″ or 83″ widths, single or tandem axle. Solid sides keep clippings and gear contained on crew runs.

• 14 ft
• Bumper Pull

• Lawn crews
• Mulch & debris
• Daily use

83″ x 14ft tandem-axle landscape at 7,000lb GVWR. The crew-size step up with solid sides for clippings, mulch, and gear.

• 16 ft
• Bumper Pull

• Bulk material
• Brush & debris
• Lawn crews

16ft landscape with 4ft solid sides and up to 9,995lb GVWR. Swallows mulch, brush, and bulk loads a standard side rail can't.

• 14 ft
• 4 ft–6 ft walls

• Basic roll-off needs

A simple, affordable roll-off bin for basic needs.

• 14 ft
• Gooseneck
• 15,680 lb GVWR

• Bin swapping
• Dumpster work

Gooseneck roll-off for bin swapping and dumpster workflows.

• 14 ft
• Gooseneck
• 20,000 lb GVWR

• Commercial operations

High-capacity gooseneck roll-off for commercial operations.